Dr Amer Alit

About

Dr. Amer Ali got his Ph.D in 2004, his research was about essential oil extraction. Dr. Amer combines academic and industrial experiences, with animmense experience in process design and process control, accumulated throughout 8 years of working as process engineer. He has been awarded Appreciation Award from Abu Dhabi Polytechnic for outstanding performance, 2016, and Student’s Choice Award as a Best Lecturer in Chemical Engineering Department/Curtin University of Technology, 2006. Currently, Dr. Amer teaches Process and Product Design, Reaction Engineering, and Process Design in Muscat University.

• Biodiesel production development, essential oil extraction by microwave, metal hydride alloys as hydrogen storage media for fuel cell, air pollution control, heat transfer enhancement

Journal Papers

1- A Ali, Rosli Mohd Yunus and Ramlan abd Aziz, 2018, “Microwave-Assisted Extraction of Essential Oil from Eucalyptus: Study of the Operating Conditions Effects”. The Journal of Engineering Research, Vol. 3, No. 1, pp. 36-42

2- A Ali, D LaBrier, KJ Howe, ED Blandford, 2017, “Experimental Study of Aqueous Chemical Trisodium Phosphate-Buffered Environment Under Post-LOCA Conditions With Head Loss Measurements” Journal of Nuclear Engineering and Radiation Science 3 (2), 021002

3- M Liu, NR Brown, KA Terrani, A Ali, ED Blandford, DM Wachs, 2017, “Potential Impact of Accident Tolerant Fuel Cladding Critical Heat Flux Characteristics on the High Temperature Phase of Reactivity Initiated Accidents” Annals of Nuclear Energy 110, 48-62

4- A Ali, D LaBrier, E Blandford, K Howe, 2016, “Corrosion and solubility in a TSP-buffered chemical environment following a loss of coolant accident: Part 4–Integrated chemical effects testing” Nuclear Engineering and Design 300, 644-654

5- D LaBrier, A Ali, KJ Howe, ED Blandford, 2016 “Integrated Chemical Effects Head Loss Experiments Using Multiconstituent Fibrous Debris Beds” Journal of Nuclear Engineering and Radiation Science 3 (1), 011006

6- Sterling Olson, Amir Ali, Daniel LaBrier, Edward D Blandford, Kerry Howe, 2016, “Corrosion and Solubility in a TSP-Buffered Chemical Environment Following a Loss of Coolant Accident: Part 2 – Zinc” Nuclear Engineering and design Journal 300 (1), 620-631

7- Amir Ali, and Edward Blandford, 2016, “An Experimental Study on Head Loss of Prototypical Fibrous Debris Beds During Loss of Coolant Accident Conditions” ASME Nuclear Engineering and Radiation Science 2 (3), 031006

8- MS El-Genk, A. Ali, 2015,”Saturation Boiling Critical Heat Flux of PF-5060 Dielectric Liquid on Micro porous Copper Surfaces,” Journal of Heat Transfer 137 (4), 041501.

9- Y Xia, J Ye, P Murray, A Ali, Q Ge, Z Zhang, 2013, “Imaging reactions of acetone with oxygen adatoms on partially oxidized TiO2” Physical Chemistry Chemical Physics 15 (33), 13897-13901

10- Ali, A., and El-Genk, M. S., 2012, “Effect of inclination on saturation boiling of PF-5060 dielectric liquid on 80 and 137 μm thick copper micro-porous surfaces,” International Journal of Thermal Sciences, 53, 42-48

11- Ali, A.,and El-Genk, M. S., 2012, “Spreaders for immersion nucleate boiling of a computer chip with a central hot spot,” Journal of Energy Conversion and Management, 53(1), 259- 267

12- A Ali, MS El-Genk, 2012. “Spreaders for immersion nucleate boiling cooling of a computer chip with a central hot spot” Energy Conversion and Management 53 (1), 259-267

13- A Ali, MS El-Genk. 2012. “Effect of inclination on saturation boiling of PF-5060 dielectric liquid on 80-and 137-μm thick copper micro-porous surfaces” Volume 53, March 2012, Pages 42-48, International Journal of Thermal Sciences

14- MS El-Genk, A Ali, 2011, “Subcooled boiling of PF-5060 dielectric liquid on microporous surfaces” Journal of Heat Transfer 133 (8), 081503

15- MS El-Genk, A Ali, 2010.” Enhanced nucleate boiling on copper micro-porous surfaces” International Journal of Multiphase Flow 36 (10), 780-792

16- MS El-Genk, A Ali, 2010, “Enhancement of saturation boiling of PF-5060 on microporous copper dendrite surfaces” Journal of heat transfer 132 (7), 071501

17- A Ali, Rosli Mohd Yunus and Ramlan abd Aziz, 2006, “Yield Study for Extracted Tea Tree Essential Oil Using MAP”. ASEAN Journal of Chemical Engineering, Vol. 6, Issue 1, pp. 1-7

Conference Publications

1- A Ali, Ai Mian, 2018, “Biodiesel Fuel from Palm Oil: Preliminary Yield Study” The 6th International Conference on Chemical and Bioprocess Engineering (SOMChE/ICCBPE), Sabah, Malaysia

2- Ali, A.,and El-Genk, M. S., 2013, “An Investigation of the Effect of Inclination on Critical Heat Flux of PF-5060 Dielectric Liquid on Microporous Copper Surfaces,” ASME IMECE2013, San Diego, California, paper#IMECE2013-65503

3-MS El-Genk, A Suszko, A Ali, 2013, “Effects of Surface Roughness and Inclination angle on Nucleate Boiling of PF-5060 Dielectric Liquid on Copper” Proceedings ASME International Mechanical Engineering Congress & Exposition

4-A Ali, MS El-Genk 2012, “Numerical analysis of spreaders with an enhancing nucleate boiling surface for immersion cooling of chips with central hot spots” Proceedings 13th Intersociety Conference on Thermal and Thermo-mechanical Phenomena in Electronic Systems

5-MS El-Genk, A Ali, 2008, “Saturation Boiling of PF-5060 Dielectric Liquids on Micro-Porous Copper Dendrites Surfaces” ASME 2009 Heat Transfer Summer Conference collocated with the InterPACK09 and 3rd Energy Sustainability Conference

6-Serena Ti Wei Mei, A Ali, 2007, “Production of Biodiesel From Palm Oil” Curtin University of Technology Sarawak Engineering Conference (CUTSE), Miri, Malaysia

7-S. L. Liau, A Ali, and Y. L. Tan., 2006, “Prediction of Equilibrium Adsorption for Phenol and P-chlorophenol in Water Using Zeolite”. Curtin University of Technology Sarawak Engineering Conference (CUTSE), Miri, Malaysia

8-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz, 2003, “Characterization of Microwave-Assisted Extraction Process”. The17th Symposium of Malaysian Chemical Engineers (SOMChE), Penanag, Malaysia

9-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz.2003, “Reinforcement of Essential Oil Extraction Via Microwave Fields” The Regional Symposium on Chemical Engineering, Manila, Philippine

10-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz. 2003, “Study of Eucalyptus Essential Oil Acquired by Microwave Extraction”. The WOCMAP III, Chiangmai, Thailand

11-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz.2002, “Water Content Influence on Microwave Extraction of Essential Oil”. The Malaysia Chemical Congress, Kuching, Sarawak, Malaysia

12-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz. 2002, “Exploration of Essential Oil Extraction Using Microwave Technique”. The Regional Symposium on Chemical Engineering 2002, Kuala Lumpur, Malaysia

13-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz.2002. “Scrutiny of Microwave Essential Oil Extraction”. The 9thAPCChE Congress, New Zealand

14-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz. 2001, “Essential Oil Extraction by Using Microwave Assisted Process”. The Regional Symposium on Chemical Engineering 2001, Bandung, Indonesia

15-A Ali, Rosli Mohd Yunus and Hamdani Saidi. 2000, “Manganese Substitution Influence on Ferro Titanium Alloy as Hydrogen Storage Media”. The Regional Symposium on Chemical Engineering, Singapore

16-A Ali, Rosli Mohd Yunus and Ramlan abd Aziz. 2000, “Study on Microwave Assisted Process in Chemical Extraction”. The Malaysia Science and Technology Congress 2000, Genting Highlands, Pahang, Malaysia

17-A Ali, Rosli Mohd Yunus and Hamdani Saidi.2000, “Characterization of Ti Fe0.9Mn0.1Alloy as Hydrogen Storage Medium”. The Regional Conference on Energy and Environment, Selangor

18-A Ali, Rosli Mohd Yunus and Hamdani Saidi.1999, “Metal Hydride Performance Test Using New Activation Process”. The Regional Symposium on Chemical Engineering, Hat Yai, Songkhla, Thailand

19-A Ali, Rosli Mohd Yunus and Hamdani Saidi. 1999, “HydrogenAbsorption and Desorption Characteristics of Ferro Titanium Manganese Alloy”. The World Engineering Congress and Exhibition, Selangor, Malaysia